Powerextra LCD Display Flash Speedlite, 2.4G Wireless Flash Trigger Transmitter Kit for CA Nikon Pentax Panasonic Olympus and Sony DSLR Camera, Digital Cameras with Standard Hot Shoe

Product Description

Powerextra Professional LCD Screen Flash Speedlite With 2.4G Trigger Kit

GN Number: 33(ISO100, 35mm)

Flash Type & Flash Duration: M Multi S1 S2;1/300-1/20000S

Flash Coverage & Recycle Time: 24 mm; 0.1-5 seconds(Using AA alkaline battery)

Wireless Transmission Distance: 50 M

M Modes: In this mode, you can set your flash onto your camera hot-shoe or speedlite trigger hot-shoe to trigger the flash. When shooting, adjust the flash power and press the camera shutter button, the flash light will flash under the camera synchronous signal.MuIti Flash Mode: Under Multi flash mode, the flash will fire at the your setting of output power/ flash frequency and flash times. And through left/right Fn button you can adjust the output power. The range of output power is 1/128-1/64/-1/32/-1/16-1/8-1/4. If need to set flash times and frequency, please press the flash times/frequency select button. the multi flash time/frequency instruction icon will flicker in the LCD, at this time you can adjust the flash times/flash frequency through left/right Fn button.S1 /S2 Modes: The mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for manual flash environment. When the flash is S1 mode, it will fire synchronously when the master flash comparable with effect by the flash trigger.

NOTE: Use reflection board to take photos

When bounce flash, use built-in reflection board can make the subject’s eyes brighter and more charming, also can avoid lightening the front place of subject.

1 Battery Powered 2 Flash Duration: 1/20000S 3 Maximum angle 270° 4 Adjustable Parameters

Power-Saving Function 2.4G Wireless Trigger Transmitter System

Enter RX Slave Flash Mode, supporting WT-U triggering with 15 channels available. Simply set the flash and WT-U trigger to the same channel for usage. It supports up to 15 transmitter and receiver units within a 50m range.In M and Multi modes, if left idle, the flash will enter standby mode after about 30 mins. Press any button to wake it up. In Wireless Flash (S1/S2) mode, if left idle, the flash will enter standby mode within 60 mins. Press any button to wake it up.

Package Included:

Flash Light x1

Protection bag & Mini stand x1

2.4G Wireless Flash Trigger x1

Wide Compatibility: Great camera flash with High Guide No.33 (ISO 100, 35mm), supports manual/S1/S2/Multi flash mode. Compatible with most CA Nikon Panasonic Olympus Pentax and Other DSLR cameras with standard hot shoe and Sony Camera with New Mi Hot Shoe like Sony A7 A7S/A7SII A7R/A7RII A7II A6000 A6300 A6500 (NOT compatible with Ca 1500d/2000d/4000d)
2.4G Wireless Trigger Transmitter: 15-channel transmitter and receiver unit with operating range of 50m (164ft). Goes into RX Slave Flash Mode, it supports WT-U trigger, equipped with 15 channels. Only need to set the flash and trigger WT-U at the same channel when using. That trigger system can set multi flashes lighting application
Rotation Angle and More Function: Vertical rotation angle: -7~90 degrees, horizontal rotation angle: 0~270 degrees, fixed zoom, provide you with a rich flash perspective. Additional Function: Power saving mode, synchronization, external charging, over temperature protection and systematic over temperature protection fuction
MuIti Flash Mode: The flash will fire at the your setting of output power. The range of output power is 1/128-1/64/-1/32/-1/16-1/8-1/4-1/2-1/1. You can test the flash under any mode. When testing, the flash will flash with corresponding brightness according to the selected output power level
What You Get: 1 x Speedlite Flash built-in flip down wide angle flash diffuser and reflection panel, 1 x Mini Stand, 1 x 2.4G Wireless Flash Trigger, 1 x User Manual