PBD Digital Outdoor TV Antenna, 150 Mile Motorized 360 Degree Rotation Support 2 TVs, Grounding Block, Mounting Pole, 50FT RG6 Coax Cable, Wireless Remote Control, UHF/VHF, Snap-On Installation

Product Description

Why should you Cut the Cord?

Recent studies have shown that over 90% of the US population is within range to stream free over-the-air HD television.

The average US household’s cable bill is 123. This means you can save over 1,400 a year by simply dropping Cable TV.

Cable companies are allowed to downgrade their service by 30% to save on transmission costs. OTA doesn’t have this problem.

PBD #WA-2608 Compact Outdoor Yagi TV Antenna

This Compact Outdoor Antenna provides local television in full 1080 HD quality, for free. Its pre-assembled design mounting hardware provide a variety of placement options. Don’t settle for a lesser picture or fewer channels when you know your TV is capable of delivering much more!

Supports up to 1080i & 4K HDTV broadcasts Receives UHF and VHF channels = more content! Pre-assembled design with easy-lock fold-out VHF reflector and snap-lock elements Frequency Range: VHF: 170-230MHz / UHF: 470-860MHz Typical Antenna Gain: VHF 28~32dB | UHF 32~36dB Impedance: 75Ohm Max Output Level:105dB u V Main Voltage: AC120V±10%/60Hz Operation Temperature: -10° C ~ 50° C Package Dimensions: 17.5 x 12.4 x 4 inches with 6.3 Pounds

ENJOY LIFETIME 4K & HD TV FOR FREE

A Leader In Cutting-Edge Technology

Why do our antennas outperform the competition? The proof is in the patented SNAP-ON design. The 2608 series is engineered to respond to a greater range of frequencies along with a wide beam angle eliminating the need for rotation.

This outdoor HDTV antenna is designed as a perfect substitute for your annual cable to receive digital TV UHF/VHF signals. You can now enjoy free 4K high definition television without the high cost of cable or satellite. We also built it with motorized ability, you can adjust the antenna up to 360° now, simply by using the infrared remote control.

Package Contents

1 – HDTV Yagi antenna built-in amplifier

1 – Motor-fixed bolster with 50FT RG6 Coaxial cable

1 – Remote Control (AAA batteries NOT included）

1 – UL adaptor

1 – J-shape mounting Pole

1 – Control box

1 – Coaxial Grounding Block (To protect your house and your TV installation, your antenna system must be properly grounded.)

Note: TV signal reception is immensely affected by the conditions such as antenna height, terrain, distance from broadcasting transmission antenna and output power of transmitter. Channels you can watch may vary depending on these conditions.

WARNING: For this HD Digital TV Antenna,Sold by pbd is the ONLY Official Seller, anyone who sells under this listing is not authorized, please stay away those fake sellers and scammers to secure your own interests.

Support 2 TVs at the same time without extra splitter (Built-in)

1, Clamp a#10 copper or #8 aluminum grounding wire to the base of the antenna mast. Using stand-offs every 1.2m to 1.8m /4 to 6 feet, run the wire down the building in as straight a line as possible.

2, Attach a 300-Ohm static discharge unit (lightning arrestor) or a 75-Ohm grounding block to the antenna’s lead-in cable as close as possible to the point where the cable enters the house.

3, Attach the grounding wire to the lead-in cable’s grounding unit and run the wire to the central building ground.

Acceptable central building ground points may include:

Grounded interior metal cold water pipe within 1.5m/ 5 feet of the point where it enters the building Grounded metallic service raceway

Grounded electrical service equipment enclosure

2.4m / 8foot grounding rod driven into the ground (only if bonded to the central building ground by #6 or heavier bonding wire)

Other acceptable electrodes that comply with the sections 250 and 810 of the National Electrical Code (NEC)

Important information on how to connect your HDTV Antenna

​Preamplifer Indicator Light

Make sure the Preamplfier indicator light on the antenna main unit is power on.

Reposition the antenna to a different location: we highly recommend to place it higher on the roof or wall. Sometimes moving a few feet can make a great difference.

Antenna Pole

Need an antenna that comes with all mounting accessories? Don’t worry about searching for a suitable mounting pole, because one is already included in the box.

WARM TIPS

The antenna would work best with original accessories. DO NOT use a switch or splitter between the Antenna and the control box. Splitter can be used after controll box only! Please connect the given cable to the control boxr(Power Supply) directly, if the cable is not long enough, you can use an F-F coupler (Splice Adapter) to extend your cable.

Tips You May Concern about Proper Using an Antenna

Recommended to be mounted 30 feet above the ground

Generally, the higher the antenna is above the ground, the better it performs. The amount and quality of the channels you receive will depend on the following:

1) Channels being broadcast in your area

2) Broadcast tower locations

3) Strength of the broadcast signals

4) Line of sight and environmental terrain

Easy Set Up

PBD TV antennas are easy to install:

1) Connect the antenna’s coax cable into the back of your digital-ready TV.

2) Find the optimal placement for the antenna.

3) Scan for available channels, and you are ready to enjoy your free content.

Both VHF and UHF

Many antennas on the market are optimized to receive only UHF broadcasts and do not reliably receive VHF. All PBD TV antennas are precision-tuned to receive both UHF and VHF frequencies and will provide you with the most HD content.

Please check the TV’s manual to make sure the TV has a built-in tuner for receiving over-the-air broadcast

Retune your TV and/or digital box from time to time to ensure you are receiving all available services

Please Note:

1. For flatscreen HDTVs, please check the TV’s manual to make sure the TV has a built-in tuner for receiving over-the-air broadcast, and make sure this tuner can receive HD signals or else it will not be able to receive and watch HD channels.

2.Retune your TV and/or digital box from time to time to ensure you are receiving all available services. Retuning takes only a few minutes using the remote control.

3.Antenna signal strength can vary depending on distance from the tower, terrain, and weather. Reposition the antenna in a different location if needed. It is best for the antenna to be in line of sight with the TV tower(s) and avoid obstructions. Always re-scan for channels after moving the antenna.

4. If your TV has no built-in tuner, you can add an ATSC digital converter box to receive the HD signal.

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.3 out of 5 stars
17,737

4.3 out of 5 stars
1,738

4.3 out of 5 stars
5,323

4.3 out of 5 stars
712

4.2 out of 5 stars
1,135

4.5 out of 5 stars
359

Price

$50.97$50.97 $55.99$55.99 $46.98$46.98 $49.99$49.99 $54.98$54.98 $35.99$35.99

Antenna Mounting pole

✓

✓

✓

✓

Coaxial Grounding Block

✓

✓

RG6 Coax Cable
40 feet 50 feet 59 feet 40 feet 40 feet

Remote control

✓

✓

✓

✓

Amplified or Passive
Amplified Amplified Amplified Amplified Amplified Passive

150 Miles Antenna and Dual TV Outputs –Full HDTV support 720p, 1080i, 1080p, 4K | Working Frequency: VHF 170~230MHz | UHF 470~860MHz | Receive free digital broadcast high definition TV signals. Support 2 TVs at the same time without a splitter. No special adapter needed.
Wireless remote controller — Built-in 360 degree Strong Motor rotor | Built-in Super High Gain and Low Noise Amplifier | includes 50FT RG6 Coaxial cable. Easy for you to place it to get the best reception in your house.
Snap-On Installation–Snap On Elements no tools required. Comes with an easy-to-follow user manual so you can install the antenna with ease.
Weather Resistant– 150 miles antenna is for outdoor using. Antenna is lightning protected, durable design with grounding done -don’t get struck out by bad weather.
What you get — PBD outdoor antenna with wireless remote, power supply adapter , 50FT coaxial cable, grounding block and mounting pole.